Here’s a dentist who knows the drill.

Answers from the lab

[1] What impression material should be used?
A PVS or VPS medium to heavy body is recommended.

[2] What bite registration material should be used?
A quick setting VPS. Wax bite registration is not recommended.

[3] Do I need to capture the third molars on impressions?
No. You will only need to capture the 2nd molars.

[4] What model stone should be used?
A Dye-stone is recommended.

[5] When should I reschedule patients for fitting the final product?
Based on the production and shipping timeline, we’d suggest 10-14 working days from the day you send the order to the lab.

[6] Does the Mouthwear need to be adjusted when fitting?
The Mouthwear should fit properly without adjustment. If you feel adjustments are needed, please contact the Provider Service Center for help. Contact information is below.

[7] How long does shipping take? Can I rush ship a case?
All products are shipped at no charge via FedEx Ground and times vary dependent on location. Expedited shipping is available and charges do apply.

[8] How do I receive more shipping boxes, Rx forms, or shipping labels?
If you need supplies, please check them off on the Rx Form of your next order and the requested supplies will be shipped back to you. Please call our Provider Service Center to request additional supplies.

[9] Are patient models sent back with the finished product?
No, patient models are not returned unless specifically requested.

[10] Is this a taxable item?
In most states UAPM is a taxable item, but please check with your representative to confirm.

[11] Who do I call for additional information?
Please call the Provider Service Center toll-free at 1-877-248-3832 or email: customerservice@bitetech.com

Answers from the dentist

[1] Can UAPM be used to treat TMJ Disorder or used as an anti bruxing “grinding” appliance?
Although some doctors have prescribed UAPM with success in patients suffering from TMJD, this appliance is not recommended for the treatment of TMJD or patients with this disorder. Nor is it recommended as an anti-bruxing device.

[2] Is UA Performance Mouthwear™ for adults only?
All adults and children ages 8 and older are potential candidates for Under Armour Performance Mouthwear™. However, if your patient has braces, please encourage them to speak with their orthodontist about their individual situation before fitting them.

[3] How long will the UA Performance Mouthwear last?
Under Armour Performance Mouthwear should last at least one sports season unless your jaw or teeth change dramatically, or you chew on the product.

[4] Does this Mouthwear prevent concussions?
No research has been published that proves any mouthwear can prevent concussions. Under Armour Performance Mouthwear offers protection from blows to the head directly under the jaw, and may reduce G-Force impact on the jaw.

[5] Is it necessary to set the patients bite?
There is no need to set the patients bite. Our appliance is not locking the patients jaw in any permanent position. The jaw is free to move. A centric occlusion “co” bite registration is the researched bite behind UAPM and what is required for fabrication.

[6] Can UA Performance Mouthwear be claimed under insurance?
Some offices have successfully submitted the Under Armour Performance Mouthwear™ expense to the patient’s insurance provider. Please check with the patient’s provider to find out if a claim would be accepted.